Terraco Terramix Fine

Terraco Terramix Fine

Product Overview

- Terramix Fine is formulated for plastering and repair of exterior and interior surfaces.

- It gives a hard, smooth, water resistant, high quality finish, suitable for painting and wall papering.

- Terramix Fine is trowel / spray applied to a thickness of 1mm to 3mm and levelled with a steel float.

- Smooth finishing can be achieved with a wooden / foam float when the Terramix Fine has set.

- The float should be moistened during the smoothing operation.

Properties

- Ready to use

- Smooth surface

- Excellent adhesion

- Water resistant

- Crack resistant

Areas Of Use

- Plastering and repairing of cast-in-situ concrete

- Lightweight concrete

- Fair-faced dense concrete

- Concrete blockwork

- Brick work

Application Method

Surface Preparation:

- Ensure the surface to be covered is free of loose particles, dust, dirt, grease, oil, and paint.

- Absorbent and porous substrates should be moistened with water prior to the application of Terramix.

Bonding:

- Under extreme climatic conditions and on very absorbent or porous surface the standard code of practice for the use of cementitious products should be followed. Priming and/or the addition of Terrabond A to the mixing water in the ratio of 1:15 is recommended.

Mixing:

- Mix thoroughly with the recommended water addition in a high speed mixer (such as the Terraco SM 50 or SM 100) or with a hand agitator for 3 – 5 minutes. In normal conditions, let Terramix stand for 5 minutes, then re-stir and use.

Application:

- Terramix is trowel applied and levelled with a steel float. Smooth finishing can be achieved with a wooden or foam float when the Terramix has ‘set’.

- The float should be moistened during the smoothing operation.

- A completely smooth surface is obtained if loose particles are removed with a soft brush when the Terramix is dry.

- Clean tools and equipment with water after use.

- Terramix should not be allowed to stand unused in spray equipment for longer than 30 minutes.

- Terramix should not be allowed to stand unused in spray equipment for longer than 30 minutes.

- Clean tools and equipment with water after use.