Terraco Terrafix W22 Tile Adhesive

Terraco Terrafix W22 Tile Adhesive

Product Overview

- Terrafix W22 is a high strength flexible wall tile adhesive with excellent nonslumpand extended open time characteristics.

- Terrafix W22 complies with the requirements as per EN12004 and passes all tests required for C2TE classified adhesives.

- Terrafix W22 is suitable for interior and exterior walls.

Properties

- Excellent adhesion

- Non-slump

- Easy workability

- Water resistant

- Extended open time

- Excellent flexibility

Areas Of Use

- As a high strength non-slump ceramic tile adhesive for laying stone

- Mosaic

- Marble

- Natural stones Vitrified tiles on masonry substrates such as sand/cement render

- Precast concrete

- Gypsum board

- Cement fibre board

Application Method

Surface Preparation:

- Ensure that the surface to be covered is clean and free of foreign matter.

- Absorbent and porous substrate should be wetted thoroughly with water prior to the application of Terrafix W22.

- Dusting surfaces should be treated with a penetrating primer.

Mixing:

- Add about 5.6-6 litres of water to 20kg of Terrafix W22 and mix thoroughly to a thick and creamy consistency.

- Let it stand for 5 minutes, re-stir and apply.

Application:

- Apply Terrafix W22 in a layer approximately 3mm thick to the surface with the smooth side of a notched trowel.

- Pull the trowel through the applied layer with the notched edge.

- Push the tiles into place so that full adhesion is obtained. Fix tiles before the adhesive has surface dried.

- Plan work accordingly.

- Prepared material must be used within 1 hour.

Spacing:

- To ensure even spacing, tile spacers of the required thickness are recommended.

Grouting

- Refer to Terragrout data sheet for details.

Expansion Joints

- Expansion joints, when necessary, should be incorporated in the design stage.