Weberseal PS-1000 PG

by Weber

Dhs. 135.00 - Dhs. 135.00

Dhs. 135.00

Dhs. 135.00 - Dhs. 135.00

Dhs. 135.00

Quantity

Bulk Enquiries

Two-component polysulphide joint sealant

weber seal PS 1000 GG/PG is a two part polysulphide high grade sealant rubber like, with an outstanding resistance to deterioration due to weathering, ozone, ultra-violet exposure and chemical attack. It has the ability to withstand repeated cycles of compression and expansion over a wide temperature range, and has excellent adhesion properties to all materials commonly used in building and construction work. weber seal PS 1000 GG/PG two part Polysulphide can be supplied in pouring and gun grade for sealing horizontal and vertical joints where structures are subject to high rapid movements is expected and where the performance specification is highly rigorous. It has an excellent stain resistance and is non-toxic once cured.

Surface of application

Floor, Roof, Wall

Available packing :

UAE	KSA	Lebanon	Oman	Qatar	Kuwait	Jordan	Egypt
4 Lt, 2.5 Lt	4 Lt, 2.5 Lt	4 Lt, 2.5 Lt	4 Lt, 2.5 Lt	4 Lt, 2.5 Lt	4 Lt, 2.5 Lt	4 Lt, 2.5 Lt	4 Lt, 2.5 Lt

Feature and benefits :

Sealing horizontal and vertical joints where high movements is expected
Tough resilient seal
Outstanding resistance to ageing
Excellent adhesion properties
Chemical resistant
Resistant to UV light

Things to consider :

All surfaces have to be clean, thoroughly dry and free of oil with no loose particles remaining
Where required, masking tape and bond breaker should be applied before priming.
weber seal PS 1000 GG/PG should be applied within 2 hrs. of priming, otherwise repriming will be necessary
Weber seal PS 1000 GG/PG is designed to be applied using a sealant gun, but can be applied by trowel if required
Mix and use one complete unit at a time - do not part mix
Mixing and application equipment should be cleaned immediately with tool cleaner, using rubber gloves to avoid direct contact with skin.