Webercol Flex | Tile Glue
Two components high performance cementitious flexible tile adhesive (Latex modified)
PRODUCT
Webercol flex is a two-component cement-based polymer modified, flexible, waterproof tile adhesive for internal & external use. It is a ready mix powder containing cement, siliceous sand and additives. Webercol flex has outstanding qualities such as high bonding strength, high resistance to water and chemicals, water tightness and flexibility. It is used internally and externally with a wide range of small to large tiles, and in cases of permanent exposure to high degrees of humidity.
SCOPE OF USE
Applicable tile types include: • Ceramic • Granite • Sandstone • Marble • Mosaics • Porcelain Applicable substrates include: • Concrete • Lightweight blocks • Stone walls (cleaned and prepared) • Cement-based plaster and renders • Gypsum board • Glazed tiles • Wood agglomerates • Aluminum coverings • Ceramic & terrazzo tiles (after preparation) Over difficult substrates such as cement board, gypsum, wood..., primer is required, consult company for advice. Applicable conditions include: • Where thermal and dimensional variations are expected • In vibrating areas • For external & internal waterproof tiling • Where resistance to chemical aggression is required Applicable cases include: • Swimming pools • Porcelain • Bathrooms • Rooms • Stairs • Parking • Heated floors • Balconies • Terraces • Public showers • Hospitals • Subways.
CHARACTERISTICS
Appearance Powder + Liquid Powder composition Cement (ASTM C150), fillers-sand and admixtures Liquid composition Resins (polymer additives), admixtures Color Grey or White Density 1.55 kg/lit. ± 0.05 Open Time 25 min. at 20°C Pot Life 2 hrs at 20°C Setting Time (min.) Initial set: 840 Final set: 900 Drying time before traffic 24 hrs at 20°C Shelf Life 6 months Mixing Ratio Mix pre-packed liquid and powder Coverage 3 to 7 kg/m² Service Temperature -20°C to +70°C.
PRECAUTIONS
Apply Webercol flex on the substrate by areas of around 1m² each, which can be tiled within a maximum of 25 minutes from application time at 20°C. After that time, an outer skin may form thus preventing the tile from adhering properly to col flex. Adjustments to the tiles should only be made during weber.col flex’s open time. It is recommended to leave a minimum width of 2 mm around the tiles. Grouting the tile joints should only be done at least 24 hours after tiling, using Weberjoint perfect or Weberjoint (Carrojoint). For immersed areas, allow 21 days curing for Webercol flex before filling with water. Clean the tools with water after use.
STORAGE
Webercol flex can be stored for 6 months in dry conditions, away from extreme temperatures and protected against wind.