Fenomastic Enamel Semigloss Finish (Oil-Paint)

 Recommended use

Jotun Fenomastic Enamel is strongly recommended for decorating and protecting interior surfaces. You can use the product on:
- Walls (Cement plaster, Concrete, block work, rendered surfaces)
- Gypsum board
- Wood
- Steel etc.
The substrate should have sufficient strength to receive the paint. Any defects in the substrate like surface undulations, cracks, pin holes etc., should be rectified/filled before starting painting.

The product can be applied by
Roller : Recommended.
Brush : Recommended to paint corners and edges.
Spray : Airless spray or Conventional spray.

Cleaning of painting tools
Jotun Thinner No. 2

Coverage
5 sqm / L (for applying 2 coats of paint)

Thinner and Dilution
Use Jotun Thinner No. 2. But maximum 10%

Recommended paint system

For walls
Primer                          : 1 coat x PVA Primer                           
Smoothening Coat       : 2 coat x Stucco                                              
Topcoat                        : 2 coat x Fenomastic Enamel  

On wooden surfaces:
Primer                          : 1 coat x Bengalac Woodprimer
Smoothening Coat       : 2 coat x Stucco
Topcoat                        : 2 coat x Fenomastic Enamel 

On steel surfaces:
Primer                          : 1 coat x Bengalac Red Oxide Primer
Topcoat                        : 2 coat x Fenomastic Enamel 

If you are painting over an already painted substrate, you can decide to directly use a topcoat, skipping stucco and primer. Nevertheless, there is no harm in using a primer and just skipping stucco, as it will help in bonding the new paint better with existing paint.

Disclaimer
The information in this document is given to the best of Jotun's knowledge, based on laboratory testing and practical experience. Jotun's products are considered as semi-finished goods and as such, products are often used under conditions beyond Jotun's control. Jotun cannot guarantee anything but the quality of the product itself.

Additionally, due to variances among screen settings and different operating systems, the colours that appear on your screen may not be the exact result that achieve. We have tried to minimise the difference to the maximum, but keep this in mind when selecting the colours 😊

 Can't find what the perfect colour? Order custom colours.

At Bulls Hardware we give an option for customers to select colours from any Jotun Colour Cards.

1. Select the colour you need from the below link:
https://www.jotun.com/me/en/b2c/inspiration/colours-gallery/index.aspx
2. Once you find your perfect colour, click Custom Colour option. We have categorized the custom colour option into 3 types - Light, Medium & Dark tones. Prices are usually lower for lighter tones and they increase as the colour strength increases. So, select the apt option based on the colour tone selected.
3. Once you click on any custom colour tab option, a section opens up to write the colour code and colour name of your selection.
4. Click 'Add to Cart' and that’s it! Happy Shopping 😊

P.S. For professionals who know their colours, you can specify any RAL or NCS code as well.