Henkel Polyseal PS PG 4L

Polyseal PS PG is a two component pourable, self leveling polysulphide resin based joint sealant. Polyseal PS PG is specifically designed to be used as a watertight seal for moderate movement and control joints in horizontal areas. It is based on a liquid polysulphide polymer which when mixed with the hardener, cures to form a tough, flexible and non staining rubber like seal. Polyseal PS PG has excellent adhesion to concrete, stone, metals and other common building surfaces. The cured sealant has good resistance to most environmental chemicals & resists deterioration on prolonged exposure to UV. Polyseal PS PG is suitable for use in horizontal areas with a maximum slope gradient of 10%. the sealant has a movement accomodation factor (MAF) of ±25%

CHARACTERISTICS

► Highly resilient with excellent recovery characteristics

► Provides permanent and uniform watertight seal

► Non-staining

► Excellent resistance to fatigue and stays flexible throughout its service life–won’t become brittle, caulk or crack due to ultra violet exposure

► Prevents uncontrolled cracking by allowing expansion and contraction during temperature changes

► Excellent adhesion to most common building substrates

► Good resistance to ageing. Retains joint soundness once cured

► Resistance against mild chemicals, hydrocarbon fuels, sea water

► Non-toxic. Can be used in potable water applications, swimming pools

Fields of application

Sealing of movement and control joints in:

– structural floor joints

– airport runways and apron pavements

– industrial warehouses

– garages & workshops

– swimming pool floors

LIMITATIONS

Polyseal PS PG is not recommended for:

– vertical joints

– movement joints having maf >25%

– damp and contaminated surfaces

– asphalt pavements

– over painting (paint compatibility with sealant shall be checked prior to painting)

4Joints >50mm width

SUPPLY

Polyseal PS PG 4L P

olyprime PS 1L pail

Polyprime NP 1L pail

Polysolvent 5L & 20L pails Ancillaries/equipments Polyrod